Qingdao terminal machine production

Put a sticker on the plastic basin and indicate the line usedStripping terminal machineModel, line specifications and quantity. In addition, for the same kind of wire processing, after the stripping terminal machine is continuously operated for 1 hour, it is necessary to re-check to confirm the length of the wire and the length of the wire and whether the wire effect is qualified, and then continue production after confirming that it is qualified. Ensure the quality of each batch of the stripping terminal machine.

Dongguan JulunFully automatic terminal machinein Safety check before operation: Confirm that the wrench has been removed. Tighten the round nut after adjustment. Press the operation switch of the automatic terminal machine to the working position, and the motor starts to run. Place the wire in the proper position of the crimping part of the terminal (the crimped terminal must be in the middle of the upper and lower die cutters). Step on the foot switch, the main unit slides down, complete the crimping of the wire and the terminal, and send the next terminal to the crimping position. Repeat the above steps to achieve continuous crimping between the wire and the terminal.

The advanced structure design of the automatic terminal machine: Breaking the traditional meaning of the automatic mechanical work flow layout, the cutting, stripping, end punching, and twisting are highly integrated in a straight line. Greatly increase work efficiency and product quality. 3. The automatic terminal machine has a stable structure and low cost of use: As it effectively reduces the large-span cooperation between personnel and various departments in the traditional operation process, the mechanical transmission running-in is reduced, and the unstable factors are greatly reduced. The simplification of the structure greatly reduces the follow-up maintenance cost. So as to produce products more quickly.

Ultra-quiet terminal machine: using modern inverter control skills, the terminal machine with the server (inverter), similar to the working principle of the stripping machine, but does not have Active stripping function (usually used in cooperation with a computer stripping machine), suitable for crimping of various terminals and wires. Digital control, safety maintenance system, and simple operation complete the accuracy, strength and safety beyond the reach of machinery. Make the terminal The machine runs ultra-quietly,

Let’s take a closer look at the correct blade selection, installation and maintenance methods for the automatic terminal machine. The automatic terminal machine is operated by designated personnel. Before installing the knife, it is necessary to manually compare whether the selected blade is matched or not. The knife can be installed after the comparison is correct. After the installation of the knife is completed, it is necessary to use a hand test. Adjust the button down, use the special wrench to swing the main and follower wheels to make the punching stroke of the automatic terminal machine larger. If the hand does not move, consider whether it is pressure

For the processing of the same line of automatic terminal machine, after the equipment runs continuously for 1 hour, it is necessary to re-check to confirm the length of the open line and the stripped line and whether the open line effect is qualified. You can try the operation method of the terminal machine of Dongguan Julun Machinery after you are qualified. The five installation steps of the automatic terminal machine are introduced. 1. Preparations before the operation of Dongguan Julun's automatic terminal machine: (1) Check whether the crimping machine and die are installed firmly, and whether the foot switch and the power socket are firmly inserted.

So the key point is that too tight will crush the copper wire or directly break the blade. If it is loose, the terminals and wires will easily fall off. You should do more , I think you will be familiar with this one. If you still don’t understand during the operation, you can call: 0769-87883409 Dongguan Julun Machinery Co., Ltd. We are a professional manufacturer of original imported terminal machines and wire stripping machines. Will let you know how to debug the terminal machine

The advantages of high-end terminal machine: high precision, fast speed, stripping, twisting and crimping detection system. The digital control interface uses the integrated working power of light, electricity, machine, gas and magnetism, and imported electrical accessories, which are easy to operate and save time. Technical features: Vibration plate tailored to the sample, linear vibration arrangement device, and precise counting control device can ensure the accuracy of each bag. The packaging material can be determined according to customer requirements. The advanced step control of the machine and the color code tracker can be used together to obtain a perfect trademark pattern.

The beer terminal is online. Remove the wire from the terminal machine and check whether the effect of the high-end terminal machine on the wire can meet the requirements. If the requirements are not met, the equipment must be re-adjusted. After confirming that the specifications and effects meet the requirements, the sample line will be submitted to PQC for inspection. After passing the PQC inspection, mass production will begin. Arrange the wires with the terminals neatly, tie every 100 wires or every 50 wires together with rubber hoops according to the requirements of dao, and then place them neatly in the plastic basin.

Qingdao terminal machine production

The inverter itself can save power by 30%, plusUltra-quiet terminal machineElectricity is turned on once for a job, which avoids unnecessary idling of the motor and saves electricity when used. No noise, with low operating noise, high function, and low quotation.

The safety of high-end terminal machines: talk about the functional advantages of high-end automatic terminal machines. The functional advantages of high-end automatic terminal machines are introduced as follows: high-end automatic terminal machines refer to wire processing requirements The machine used, also known as the fully automatic stripping and end pressing machine, is a new type of equipment that has just been released in recent years. It is a multifunctional machine integrating feeding, cutting, stripping and end pressing. It is humane and intelligent. The high-end technology products are suitable for large, medium and small enterprises, saving labor. Increase work efficiency.

The stripping and tapping machine is a semi-automatic type. As the name suggests, it has the functions of automatic peeling and crimping of the terminals, but it requires manual feeding and manual control of the foot power switch to work. The production efficiency is high and the price is low. 3. The ultra-quiet terminal machine, the high-end terminal machine with the server (frequency converter), is a semi-automatic model, which requires manual feeding and manual control of the pedal power switch to work. The working principle is similar to the stripping terminal machine, but it does not have the automatic thinning function (usually used in conjunction with the computer wire cutting machine), low energy consumption and low price.

1. Preparations before operation of the automatic terminal machine: (1) Check whether the high-end crimping machine and die are installed firmly, and whether the foot switch and the power socket are firmly inserted. (2) Check whether the power supply voltage is consistent with the specified voltage (220V). (3) Fix the terminal roll and guide the terminal into the die through the guide plate. (4) Adjust the crimping height and manually operate the pressure test terminal. (5) After pulling the main shaft in place with an open-end wrench, remove the open-end wrench. 2. Julun automatic terminal machine is operated manually.

Qingdao terminal machine production

High-end terminal machine molds will encounter those problems. The guide plate is not smooth, the cutter is not clean, the feed is not allowed, and so on. Hello everyone, I am doing mold maintenance and management. Now I am doing mold maintenance for terminal machines. What are the issues that need to be paid attention to when maintaining molds? Thank you? Do not remove the tools for maintenance of the mold, which is a waste of time. Need to pay attention to the following points: 1. Use an air gun to clean up the remaining copper scraps inside and outside the end mold. 2. Check whether each screw is loose. 3. Check whether the tool is worn or broken.